Roofs are a vital component in the building construction process and a well-built roof will provide many years of reliable service. Unfortunately, damage and incidences such as leaks can occur and a fascia board is the key to preventing this from happening. A fascia board is typically made of wood or metal and is placed on top of the roof shingles and then over the top of the existing roof tiles. While a small amount of cracking is to be expected along the edges of a roof, the majority of damage and failures to the fascia occurs near the middle of the board and at the edge of the roof.
Most roof repairs and replacements will focus on repairing or replacing damaged fascia boards. Even when no damage is found on the surface of the roof itself, an inspection of the attic will still be needed. The attic will typically have a large amount of exposed drywall and insulation, which is easily damaged and can cause leak problems as well. If the attic is being inspected, special equipment is needed to reach it without causing damage to the wall and ceiling above. A qualified electrician should be called and an inspection of the water damage may need to begin. In most cases, a drywall replacement will be needed.
In addition to damage to the roofing and fascia, the attic can also experience extensive water damage due to rotting gutters and flaking shingles. Leakages can also occur in these areas, which may lead to mold growth and rot. An improper fix or replacement can result in increased maintenance costs. In addition, in the long run, continued maintenance costs may be more than the cost of replacing the damaged materials. In order for an attic to properly and safely protect the rest of the home, all roof cavities should be properly sealed.
Properly sealing all roof cavities will prevent damage to the fascia and seal out moisture. It will also prevent damage from seepage through the seams where water can accumulate. Leaks can occur anywhere along the fascia or along the roof decking system. Corrected and properly installed gutters and flaps will ensure that water flows away from the home and into the drainage system without harming the home’s interior.
Roof Fascia Trim The roof fascia trim is usually made out of steel. It can be made out of different types of metal such as sheet metal or aluminum. This will depend on the location of the home. It can either be straight and angled to fit around the entire edge of the roof or it can have grooves and ridges. The metal used will allow the sun to shine through and provide insulation when it is in direct sunlight.
When choosing the material to use for the fascia trim, it is important to choose a metal that is rust resistant. Some of the best choices are either stainless steel or aluminum because they are considered to be very weather resistant. If one is going to install the fascia on their own, they may want to consider using a type of wood to match the rest of the house. Using a different wood will provide a more natural look to the roof, which is one thing that the professional roofer cannot accomplish.
Attic To Roof Finishing As the name suggests, the attic finishing will be used to cover the rafters and to add a finished surface to the roof. Sometimes the finished product will include a sealant and will be pressed directly onto the rafters. This sealant will act as an insulator against moisture, which will allow a cooler inside and lower energy bills. They can also make the attic smell better by adding certain aromas.
Roofing Companies will often suggest the use of a metal roof to finish the fascia boards. However, using wood will allow the homeowner to have more control over the visual appearance of their roof. Wood looks more natural, and it does not have the tendency to rot or bend after many years of wear and tear. Using metal will require a professional roofer to install it, and this can be extremely expensive. If you do decide to get metal roofing done, make sure that the company you choose has a good reputation and a track record of quality work. Many companies that sell these products will come to your home for a free inspection and quote.